Chinese Optics Letters| Cover Article, Vol. 24, No. 5, 2026

Research Background and Problem to Be Addressed
Optical vortices are phase-singularity beams carrying orbital angular momentum, finding important applications in optical communications, quantum science, optical tweezers, and related fields. In recent years, significant interest has arisen in controlling optical vortex lines in three-dimensional space to form topological knot structures such as Hopf links and trefoil knots. Traditionally, the generation of such complex light fields has relied on devices like spatial light modulators (SLMs), but these systems typically suffer from limited operating bandwidth and require bulky, cumbersome optical setups. Although liquid-crystal phase plates and metasurfaces enable compactness, they remain essentially two-dimensional planar devices and face two major challenges: constrained design space and significant errors introduced by phase quantization. Therefore, how to utilize genuine three-dimensional fabrication techniques to precisely control optical wavefronts and generate complex topological vortex structures represents an urgent problem to be solved.
Theoretical Basis and Experimental Focus
The theoretical foundation of this study is the theory of optical vortex knots developed by Berry and Dennis et al., specifically employing an algebraic method based on the Milnor map to design light fields carrying knotted vortex lines. The phase distribution of the target light field is encoded into a phase-only hologram, combined with a blazed grating to achieve diffractive beam splitting. Experimentally, the researchers employed femtosecond laser direct writing based on two-photon polymerization (TPP) to convert the phase hologram into ultra-compact three-dimensional polymer diffractive optical elements (DOEs), with a single device measuring only 280 μm × 280 μm × 3.1 μm. During fabrication, a high-numerical-aperture oil-immersion objective was used to focus the femtosecond laser inside a photoresist, and a high-precision translation stage controlled the focal spot position to realize micro- and nano-fabrication. For characterization, a Mach–Zehnder interferometer with tunable wavelength (1500–1640 nm) was constructed; using off-axis holography and layer-by-layer scanning along the optical axis, the intensity and phase distributions in different transverse planes were reconstructed from the interferograms, thereby accurately extracting the singularity positions and reconstructing the three-dimensional vortex line topology. This work was published in Chinese Optics Letters, Vol. 24, No. 5 (2026): Tianhao Fu, Kangrui Wang, Shiao Ding, Chengkun Cai, Shuhui Li, Jian Wang, "Shaping the Hopf link and Trefoil knot in optical vortices by femtosecond laser-inscribed ultra-compact 3D devices" Chin. Opt. Lett. 24, 051301 (2026), and was selected as the cover article of that issue.
Innovation, Significance, and Potential Applications
The core innovation of this work lies in the first successful fabrication of ultra-compact polymer DOEs capable of generating optical vortex structures of Hopf links and trefoil knots, using three-dimensional sub-micron-resolution direct writing based on two-photon polymerization. Compared with conventional two-dimensional devices, the three-dimensional DOE fundamentally expands the design degrees of freedom for wavefront control and significantly reduces phase-quantization errors. Moreover, the experiments verified that the generated topological structures exhibit excellent stability over a broad bandwidth of 140 nm (1500–1640 nm), with the reconstruction volume consistently maintained at the order of 120 μm × 120 μm × 3.3 mm. This work not only demonstrates the feasibility of using three-dimensional micro- and nano-fabrication to generate complex optical field topologies, but also provides an important technological pathway for the development of compact singular-optics components. Potential applications span areas such as optical trapping and manipulation, high-capacity holographic encoding and information storage based on topological protection, and quantum information processing.
Follow-up Research Work
Looking ahead, the researchers point out that such three-dimensional polymer DOEs are expected to further advance the practical integration of optical vortex knots into applications such as optical trapping and information encryption. It is also foreseeable that, by optimizing the fabrication precision and material systems, the generation and control of more complex topological structures—such as nested vortex knots and photonic Hopfions—will be realized, and that the encoding dimensionality and information capacity can be enhanced by combining with approaches such as polarization multiplexing. Furthermore, the cross-disciplinary intersections of this technique with spin–orbit coupling and non-Hermitian topological photonics are also deemed worthy of in-depth exploration.

Schematic illustration of the fabrication of three-dimensional polymer DOEs via two-photon polymerization (TPP) for broadband topological light-field manipulation and generation of complex optical knots.

Jian Wang (Fellow, IEEE) received the Ph.D. degree in physical electronics from the Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, China, in 2008. He worked as a Postdoctoral Research Associate in the Optical Communications Laboratory, University of Southern California, USA, from 2009 to 2011. He is currently a professor at the Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, China. He is the vice director of Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, China.
He is currently an IEEE Fellow, OPTICA Fellow, SPIE Fellow, IOP Fellow IET Fellow and COS Fellow. He is also an Editor-in-Chief of IEEE Photonics Journal, Executive Editor-in-Chief of Frontiers of Optoelectronics, Deputy Editor of Chinese Optics Letters. He used to be the Topical Editor of Optics Letters. He is also a frequent reviewer of Nature Photonics and Nature Communications.

Tianhao Fu received the B.Eng. degree and M.Eng. degree in Huazhong University of Science and Technology, Wuhan, China, in 2022 and 2025. His research interests include femtosecond laser processing.

Kangrui Wang received the B.Sc. degree in material engineering from Huazhong University of Science and Technology, Wuhan, China, in 2022. Then he was a PH.D. student in Huazhong University of Science and Technology, Wuhan, China. His research interests include 3D integration fabrication and diffraction neural network.


